USB를 통해 Samsung Galaxy S2를 연결 한 후 많은“입력 / 출력 오류”

9

Samsung Galaxy S2 (GT-9100, Android 2.3.4, I9100XXKI1)를 Linux 상자 (Ubuntu 11.10 oneiric)와 연결하려고합니다.

USB 저장 모드를 사용하고 있습니다 (설정 ➔ 무선 및 네트워크 ➔ USB 유틸리티).

장치가 인식되고 두 개의 장치 노드 /dev가 작성됩니다.

syslog에는 다음과 같은 출력이 표시됩니다.

sd 9:0:0:1: [sdh] 62325760 512-byte logical blocks: (31.9 GB/29.7 GiB)
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 c8 00 00 08 00
end_request: I/O error, dev sdh, sector 1224
quiet_error: 98 callbacks suppressed
Buffer I/O error on device sdh, logical block 153
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
Buffer I/O error on device sdh, logical block 146
Buffer I/O error on device sdh, logical block 147
Buffer I/O error on device sdh, logical block 148
Buffer I/O error on device sdh, logical block 149
Buffer I/O error on device sdh, logical block 150
Buffer I/O error on device sdh, logical block 151
Buffer I/O error on device sdh, logical block 152
Buffer I/O error on device sdh, logical block 153
Buffer I/O error on device sdh, logical block 154
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
sd 9:0:0:0: [sdg] 24133632 512-byte logical blocks: (12.3 GB/11.5 GiB)
 sdg:
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:0: [sdg] Media Changed
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Unit Attention [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 00 20 00 00 10 00
end_request: I/O error, dev sdg, sector 32
 sdg:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdg:
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdg:
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:0: [sdg] Media Changed
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Unit Attention [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 00 20 00 00 48 00
end_request: I/O error, dev sdg, sector 32
 sdg:
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
quiet_error: 56 callbacks suppressed
Buffer I/O error on device sdh, logical block 146
Buffer I/O error on device sdh, logical block 147
Buffer I/O error on device sdh, logical block 148
Buffer I/O error on device sdh, logical block 149
Buffer I/O error on device sdh, logical block 150
Buffer I/O error on device sdh, logical block 151
Buffer I/O error on device sdh, logical block 152
Buffer I/O error on device sdh, logical block 153
Buffer I/O error on device sdh, logical block 154
sd 9:0:0:0: [sdg] Device not ready
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Not Ready [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Medium not present
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 01 a8 00 00 08 00
end_request: I/O error, dev sdg, sector 424
Buffer I/O error on device sdg, logical block 53
sd 9:0:0:0: [sdg] Device not ready
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Not Ready [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Medium not present
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 02 00 00 00 08 00
end_request: I/O error, dev sdg, sector 512
sd 9:0:0:0: [sdg] Device not ready
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Not Ready [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Medium not present
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 00 20 00 00 08 00
end_request: I/O error, dev sdg, sector 32
sd 9:0:0:0: [sdg] Device not ready
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Not Ready [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Medium not present
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 10 00 00 00 08 00
end_request: I/O error, dev sdg, sector 4096
sdg: detected capacity change from 12356419584 to 0
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Device not ready
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Not Ready [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Medium not present
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
sd 9:0:0:1: [sdh] Device not ready
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Not Ready [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Medium not present
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 08 00
end_request: I/O error, dev sdh, sector 1168
sd 9:0:0:1: [sdh] Device not ready
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Not Ready [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Medium not present
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 00 18 00 00 08 00
end_request: I/O error, dev sdh, sector 24
sd 9:0:0:1: [sdh] Device not ready
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Not Ready [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Medium not present
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 00 18 00 00 08 00
end_request: I/O error, dev sdh, sector 24

루트 폴더를 나열하려고하면 다음과 같은 결과가 나타납니다.

ls: cannot access /media/3CB1-07D3/Samsung: Input/output error
ls: cannot access /media/3CB1-07D3/LOST.DIR: Input/output error
ls: cannot access /media/3CB1-07D3/external_sd: Input/output error
ls: cannot access /media/3CB1-07D3/usbStorage: Input/output error
...

PhoneUtil을 사용하여 USB 연결 모드 를 재설정 하려고 시도했지만 도움이되지 않았습니다. 동일한 결과로 전화를 수동으로 마운트하려고했습니다.

그런 다음 USB 디버깅 을 사용 하려고했습니다 . 이 경우 syslog는 다음과 같이 말합니다.

usb 1-1.5: new high speed USB device number 11 using ehci_hcd
scsi10 : usb-storage 1-1.5:1.0
Jan 11 10:24:23 host mtp-probe: checking bus 1, device 11: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5"
Jan 11 10:24:23 host mtp-probe: bus: 1, device: 11 was not an MTP device
cdc_acm 1-1.5:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-1.5:1.1: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan 11 10:24:24 host modem-manager[1288]: <info>  (ttyACM0) opening serial port...
scsi 10:0:0:0: Direct-Access     Android    UMS Composite    00 PQ: 0 ANSI: 2
scsi 10:0:0:1: Direct-Access     Android    UMS Composite    00 PQ: 0 ANSI: 2
sd 10:0:0:0: Attached scsi generic sg7 type 0
sd 10:0:0:1: Attached scsi generic sg8 type 0
sd 10:0:0:0: [sdg] Attached SCSI removable disk
sd 10:0:0:1: [sdh] Attached SCSI removable disk

마운트하려고 할 때 /dev/sdg, 나는 얻을mount: no medium found on /dev/sdh

나는 이것이 한 번 USB 저장 모드를 사용하여 작동한다는 것을 어둡게 기억합니다. 그동안 펌웨어 업데이트를 설치했습니다. 다음에 무엇을 시도 할 수 있을지 아십니까?

관련이없는 질문 :

samsung-galaxy-s-2  usb  linux 
— 아론 디 굴가
소스

답변:

1

당신의 우분투는 매우 오래되었습니다. 12.03 12.10. 13.04. 13.10 14.04는 모두 최신 버전의 Ubuntu입니다. 가능하면 14.04 이상을 사용하십시오.

내 S2 sdcard의 13 가지 문제가 거의 존재하지 않기 때문에

— 사용자
소스
1
전화가 더 이상 없지만 13.xx부터 USB 연결이 대부분 작동했음을 기억합니다. 물론, 이제 S4와 새로운 문제가
— 생겼습니다
@AaronDigulla 설정 저장소에서 ums (범용 대용량 저장소)를 활성화합니다.이 기능을 사용하면 완벽하게 작동하지만 (Android에서 옵션 USB 저장소 연결 옵션을 얻는 이유를 모르겠습니다) USB 디버깅이 켜져있을 때 (테더를 뒤집습니다) mtp 오류와 내가 창 아래 묻혀 그것을 찾아 PC의 전화 저장 장치에 액세스하려면 닫습니다
— user42276
@AaronDigulla HAHHAAHA LOL 나는 이것이 2yrs 오래된 것을 보았다!
— user42276
UMS를 위해 장치를 루팅해야합니다. 난 절망적이지는 않지만 :-)
— Aaron Digulla
@AaronDigulla 그 뿌리의 가치
— user42276
0

결함 SD 카드로 인한 비슷한 증상을 간신히 기억하지만 두 가상 장치의 문제를 설명하지는 않습니다. 컴퓨터 쪽에서 다른 케이블과 다른 USB 포트를 사용해 보셨습니까? 잘못된 케이블 연결로 인해 문제가 발생하지 않도록 ...

— 모
소스
2
Uups, 질문 날짜를 먼저 확인해야합니다 ... :-D
— mo '
0

S2 USB 옵션에서 USB 전송 모드를 활성화하기를 바랍니다. 그런 식으로 나를 위해 잘 작동합니다. 추가 설정> USB 유틸리티> 대용량 저장 장치.

— 사용자
소스
열린 전화 번호부 클릭을 막는 mtp 오류 메시지로 인해 USB 디버깅을하지 않는 경우
— user42276
당사 사이트를 사용함과 동시에 당사의 쿠키 정책과 개인정보 보호정책을 읽고 이해하였음을 인정하는 것으로 간주합니다.
Licensed under cc by-sa 3.0 with attribution required.