쉼표로 구분 된 값을 열로 나누는 방법

나는 이런 식으로 테이블을 가지고

Value   String
-------------------
1       Cleo, Smith

쉼표로 구분 된 문자열을 두 개의 열로 분리하고 싶습니다

Value  Name Surname
-------------------
1      Cleo   Smith

고정 된 추가 열이 두 개만 필요합니다.

CREATE FUNCTION [dbo].[fn_split_string_to_column] (
    @string NVARCHAR(MAX),
    @delimiter CHAR(1)
    )
RETURNS @out_put TABLE (
    [column_id] INT IDENTITY(1, 1) NOT NULL,
    [value] NVARCHAR(MAX)
    )
AS
BEGIN
    DECLARE @value NVARCHAR(MAX),
        @pos INT = 0,
        @len INT = 0

    SET @string = CASE 
            WHEN RIGHT(@string, 1) != @delimiter
                THEN @string + @delimiter
            ELSE @string
            END

    WHILE CHARINDEX(@delimiter, @string, @pos + 1) > 0
    BEGIN
        SET @len = CHARINDEX(@delimiter, @string, @pos + 1) - @pos
        SET @value = SUBSTRING(@string, @pos, @len)

        INSERT INTO @out_put ([value])
        SELECT LTRIM(RTRIM(@value)) AS [column]

        SET @pos = CHARINDEX(@delimiter, @string, @pos + @len) + 1
    END

    RETURN
END

다음 쿼리를 사용하여 목적을 해결할 수 있습니다.

Select Value  , Substring(FullName, 1,Charindex(',', FullName)-1) as Name,
Substring(FullName, Charindex(',', FullName)+1, LEN(FullName)) as  Surname
from Table1

SQL Server에는 기성 분할 기능이 없으므로 사용자 정의 함수를 작성해야합니다.

CREATE FUNCTION Split (
      @InputString                  VARCHAR(8000),
      @Delimiter                    VARCHAR(50)
)

RETURNS @Items TABLE (
      Item                          VARCHAR(8000)
)

AS
BEGIN
      IF @Delimiter = ' '
      BEGIN
            SET @Delimiter = ','
            SET @InputString = REPLACE(@InputString, ' ', @Delimiter)
      END

      IF (@Delimiter IS NULL OR @Delimiter = '')
            SET @Delimiter = ','

--INSERT INTO @Items VALUES (@Delimiter) -- Diagnostic
--INSERT INTO @Items VALUES (@InputString) -- Diagnostic

      DECLARE @Item           VARCHAR(8000)
      DECLARE @ItemList       VARCHAR(8000)
      DECLARE @DelimIndex     INT

      SET @ItemList = @InputString
      SET @DelimIndex = CHARINDEX(@Delimiter, @ItemList, 0)
      WHILE (@DelimIndex != 0)
      BEGIN
            SET @Item = SUBSTRING(@ItemList, 0, @DelimIndex)
            INSERT INTO @Items VALUES (@Item)

            -- Set @ItemList = @ItemList minus one less item
            SET @ItemList = SUBSTRING(@ItemList, @DelimIndex+1, LEN(@ItemList)-@DelimIndex)
            SET @DelimIndex = CHARINDEX(@Delimiter, @ItemList, 0)
      END -- End WHILE

      IF @Item IS NOT NULL -- At least one delimiter was encountered in @InputString
      BEGIN
            SET @Item = @ItemList
            INSERT INTO @Items VALUES (@Item)
      END

      -- No delimiters were encountered in @InputString, so just return @InputString
      ELSE INSERT INTO @Items VALUES (@InputString)

      RETURN

END -- End Function
GO

---- Set Permissions
--GRANT SELECT ON Split TO UserRole1
--GRANT SELECT ON Split TO UserRole2
--GO

;WITH Split_Names (Value,Name, xmlname)
AS
(
    SELECT Value,
    Name,
    CONVERT(XML,'<Names><name>'  
    + REPLACE(Name,',', '</name><name>') + '</name></Names>') AS xmlname
      FROM tblnames
)

 SELECT Value,      
 xmlname.value('/Names[1]/name[1]','varchar(100)') AS Name,    
 xmlname.value('/Names[1]/name[2]','varchar(100)') AS Surname
 FROM Split_Names

또한 아래 링크를 참조하십시오

http://jahaines.blogspot.in/2009/06/converting-delimited-string-of-values.html

XML 기본 답변은 간단하고 깨끗합니다

참고 이

DECLARE @S varchar(max),
        @Split char(1),
        @X xml

SELECT @S = 'ab,cd,ef,gh,ij',
       @Split = ','

SELECT @X = CONVERT(xml,' <root> <myvalue>' +
REPLACE(@S,@Split,'</myvalue> <myvalue>') + '</myvalue>   </root> ')

SELECT  T.c.value('.','varchar(20)'),              --retrieve ALL values at once
  T.c.value('(/root/myvalue)[1]','VARCHAR(20)')  , --retrieve index 1 only, which is the 'ab'
  T.c.value('(/root/myvalue)[2]','VARCHAR(20)')
 FROM @X.nodes('/root/myvalue') T(c)

나는 이것이 멋진 것 같아

SELECT value,
    PARSENAME(REPLACE(String,',','.'),2) 'Name' ,
    PARSENAME(REPLACE(String,',','.'),1) 'Sur Name'
FROM table WITH (NOLOCK)

CROSS APPLY로

select ParsedData.* 
from MyTable mt
cross apply ( select str = mt.String + ',,' ) f1
cross apply ( select p1 = charindex( ',', str ) ) ap1
cross apply ( select p2 = charindex( ',', str, p1 + 1 ) ) ap2
cross apply ( select Nmame = substring( str, 1, p1-1 )                   
                 , Surname = substring( str, p1+1, p2-p1-1 )
          ) ParsedData

이를 해결하는 방법에는 여러 가지가 있으며 이미 여러 가지 방법이 제안되었습니다. LEFT/ SUBSTRING및 기타 문자열 함수를 사용하여 원하는 결과를 얻는 것이 가장 간단 합니다.

샘플 데이터

DECLARE @tbl1 TABLE (Value INT,String VARCHAR(MAX))

INSERT INTO @tbl1 VALUES(1,'Cleo, Smith');
INSERT INTO @tbl1 VALUES(2,'John, Mathew');

다음과 같은 문자열 함수 사용 LEFT

SELECT
    Value,
    LEFT(String,CHARINDEX(',',String)-1) as Fname,
    LTRIM(RIGHT(String,LEN(String) - CHARINDEX(',',String) )) AS Lname
FROM @tbl1

문자열에 두 개 이상의 항목이 있으면이 방법이 실패합니다. 이러한 시나리오에서, 우리는 스플리터를 사용하고 사용할 수 있습니다 PIVOT또는로 문자열을 변환 XML하고 사용 .nodes문자열 항목을 얻을 수 있습니다. XML기반 솔루션은 솔루션에 aads 및 bvr에 의해 자세히 설명되어 있습니다.

스플리터를 사용하는이 질문에 대한 답변은 모두 WHILE분할에 비효율적입니다. 이 성능 비교를 확인하십시오 . 주변에서 가장 좋은 스플리터 중 하나는 DelimitedSplit8KJeff Moden이 만든 것입니다. 자세한 내용은 여기를 참조하십시오

스플리터 PIVOT

DECLARE @tbl1 TABLE (Value INT,String VARCHAR(MAX))

INSERT INTO @tbl1 VALUES(1,'Cleo, Smith');
INSERT INTO @tbl1 VALUES(2,'John, Mathew');


SELECT t3.Value,[1] as Fname,[2] as Lname
FROM @tbl1 as t1
CROSS APPLY [dbo].[DelimitedSplit8K](String,',') as t2
PIVOT(MAX(Item) FOR ItemNumber IN ([1],[2])) as t3

산출

Value   Fname   Lname
1   Cleo    Smith
2   John    Mathew

DelimitedSplit8K 작성자 : Jeff Moden

CREATE FUNCTION [dbo].[DelimitedSplit8K]
/**********************************************************************************************************************
 Purpose:
 Split a given string at a given delimiter and return a list of the split elements (items).

 Notes:
 1.  Leading a trailing delimiters are treated as if an empty string element were present.
 2.  Consecutive delimiters are treated as if an empty string element were present between them.
 3.  Except when spaces are used as a delimiter, all spaces present in each element are preserved.

 Returns:
 iTVF containing the following:
 ItemNumber = Element position of Item as a BIGINT (not converted to INT to eliminate a CAST)
 Item       = Element value as a VARCHAR(8000)

 Statistics on this function may be found at the following URL:
 http://www.sqlservercentral.com/Forums/Topic1101315-203-4.aspx

 CROSS APPLY Usage Examples and Tests:
--=====================================================================================================================
-- TEST 1:
-- This tests for various possible conditions in a string using a comma as the delimiter.  The expected results are
-- laid out in the comments
--=====================================================================================================================
--===== Conditionally drop the test tables to make reruns easier for testing.
     -- (this is NOT a part of the solution)
     IF OBJECT_ID('tempdb..#JBMTest') IS NOT NULL DROP TABLE #JBMTest
;
--===== Create and populate a test table on the fly (this is NOT a part of the solution).
     -- In the following comments, "b" is a blank and "E" is an element in the left to right order.
     -- Double Quotes are used to encapsulate the output of "Item" so that you can see that all blanks
     -- are preserved no matter where they may appear.
 SELECT *
   INTO #JBMTest
   FROM (                                               --# & type of Return Row(s)
         SELECT  0, NULL                      UNION ALL --1 NULL
         SELECT  1, SPACE(0)                  UNION ALL --1 b (Empty String)
         SELECT  2, SPACE(1)                  UNION ALL --1 b (1 space)
         SELECT  3, SPACE(5)                  UNION ALL --1 b (5 spaces)
         SELECT  4, ','                       UNION ALL --2 b b (both are empty strings)
         SELECT  5, '55555'                   UNION ALL --1 E
         SELECT  6, ',55555'                  UNION ALL --2 b E
         SELECT  7, ',55555,'                 UNION ALL --3 b E b
         SELECT  8, '55555,'                  UNION ALL --2 b B
         SELECT  9, '55555,1'                 UNION ALL --2 E E
         SELECT 10, '1,55555'                 UNION ALL --2 E E
         SELECT 11, '55555,4444,333,22,1'     UNION ALL --5 E E E E E 
         SELECT 12, '55555,4444,,333,22,1'    UNION ALL --6 E E b E E E
         SELECT 13, ',55555,4444,,333,22,1,'  UNION ALL --8 b E E b E E E b
         SELECT 14, ',55555,4444,,,333,22,1,' UNION ALL --9 b E E b b E E E b
         SELECT 15, ' 4444,55555 '            UNION ALL --2 E (w/Leading Space) E (w/Trailing Space)
         SELECT 16, 'This,is,a,test.'                   --E E E E
        ) d (SomeID, SomeValue)
;
--===== Split the CSV column for the whole table using CROSS APPLY (this is the solution)
 SELECT test.SomeID, test.SomeValue, split.ItemNumber, Item = QUOTENAME(split.Item,'"')
   FROM #JBMTest test
  CROSS APPLY dbo.DelimitedSplit8K(test.SomeValue,',') split
;
--=====================================================================================================================
-- TEST 2:
-- This tests for various "alpha" splits and COLLATION using all ASCII characters from 0 to 255 as a delimiter against
-- a given string.  Note that not all of the delimiters will be visible and some will show up as tiny squares because
-- they are "control" characters.  More specifically, this test will show you what happens to various non-accented 
-- letters for your given collation depending on the delimiter you chose.
--=====================================================================================================================
WITH 
cteBuildAllCharacters (String,Delimiter) AS 
(
 SELECT TOP 256 
        'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789',
        CHAR(ROW_NUMBER() OVER (ORDER BY (SELECT NULL))-1)
   FROM master.sys.all_columns
)
 SELECT ASCII_Value = ASCII(c.Delimiter), c.Delimiter, split.ItemNumber, Item = QUOTENAME(split.Item,'"')
   FROM cteBuildAllCharacters c
  CROSS APPLY dbo.DelimitedSplit8K(c.String,c.Delimiter) split
  ORDER BY ASCII_Value, split.ItemNumber
;
-----------------------------------------------------------------------------------------------------------------------
 Other Notes:
 1. Optimized for VARCHAR(8000) or less.  No testing or error reporting for truncation at 8000 characters is done.
 2. Optimized for single character delimiter.  Multi-character delimiters should be resolvedexternally from this 
    function.
 3. Optimized for use with CROSS APPLY.
 4. Does not "trim" elements just in case leading or trailing blanks are intended.
 5. If you don't know how a Tally table can be used to replace loops, please see the following...
    http://www.sqlservercentral.com/articles/T-SQL/62867/
 6. Changing this function to use NVARCHAR(MAX) will cause it to run twice as slow.  It's just the nature of 
    VARCHAR(MAX) whether it fits in-row or not.
 7. Multi-machine testing for the method of using UNPIVOT instead of 10 SELECT/UNION ALLs shows that the UNPIVOT method
    is quite machine dependent and can slow things down quite a bit.
-----------------------------------------------------------------------------------------------------------------------
 Credits:
 This code is the product of many people's efforts including but not limited to the following:
 cteTally concept originally by Iztek Ben Gan and "decimalized" by Lynn Pettis (and others) for a bit of extra speed
 and finally redacted by Jeff Moden for a different slant on readability and compactness. Hat's off to Paul White for
 his simple explanations of CROSS APPLY and for his detailed testing efforts. Last but not least, thanks to
 Ron "BitBucket" McCullough and Wayne Sheffield for their extreme performance testing across multiple machines and
 versions of SQL Server.  The latest improvement brought an additional 15-20% improvement over Rev 05.  Special thanks
 to "Nadrek" and "peter-757102" (aka Peter de Heer) for bringing such improvements to light.  Nadrek's original
 improvement brought about a 10% performance gain and Peter followed that up with the content of Rev 07.  

 I also thank whoever wrote the first article I ever saw on "numbers tables" which is located at the following URL
 and to Adam Machanic for leading me to it many years ago.
 http://sqlserver2000.databases.aspfaq.com/why-should-i-consider-using-an-auxiliary-numbers-table.html
-----------------------------------------------------------------------------------------------------------------------
 Revision History:
 Rev 00 - 20 Jan 2010 - Concept for inline cteTally: Lynn Pettis and others.
                        Redaction/Implementation: Jeff Moden 
        - Base 10 redaction and reduction for CTE.  (Total rewrite)

 Rev 01 - 13 Mar 2010 - Jeff Moden
        - Removed one additional concatenation and one subtraction from the SUBSTRING in the SELECT List for that tiny
          bit of extra speed.

 Rev 02 - 14 Apr 2010 - Jeff Moden
        - No code changes.  Added CROSS APPLY usage example to the header, some additional credits, and extra 
          documentation.

 Rev 03 - 18 Apr 2010 - Jeff Moden
        - No code changes.  Added notes 7, 8, and 9 about certain "optimizations" that don't actually work for this
          type of function.

 Rev 04 - 29 Jun 2010 - Jeff Moden
        - Added WITH SCHEMABINDING thanks to a note by Paul White.  This prevents an unnecessary "Table Spool" when the
          function is used in an UPDATE statement even though the function makes no external references.

 Rev 05 - 02 Apr 2011 - Jeff Moden
        - Rewritten for extreme performance improvement especially for larger strings approaching the 8K boundary and
          for strings that have wider elements.  The redaction of this code involved removing ALL concatenation of 
          delimiters, optimization of the maximum "N" value by using TOP instead of including it in the WHERE clause,
          and the reduction of all previous calculations (thanks to the switch to a "zero based" cteTally) to just one 
          instance of one add and one instance of a subtract. The length calculation for the final element (not 
          followed by a delimiter) in the string to be split has been greatly simplified by using the ISNULL/NULLIF 
          combination to determine when the CHARINDEX returned a 0 which indicates there are no more delimiters to be
          had or to start with. Depending on the width of the elements, this code is between 4 and 8 times faster on a
          single CPU box than the original code especially near the 8K boundary.
        - Modified comments to include more sanity checks on the usage example, etc.
        - Removed "other" notes 8 and 9 as they were no longer applicable.

 Rev 06 - 12 Apr 2011 - Jeff Moden
        - Based on a suggestion by Ron "Bitbucket" McCullough, additional test rows were added to the sample code and
          the code was changed to encapsulate the output in pipes so that spaces and empty strings could be perceived 
          in the output.  The first "Notes" section was added.  Finally, an extra test was added to the comments above.

 Rev 07 - 06 May 2011 - Peter de Heer, a further 15-20% performance enhancement has been discovered and incorporated 
          into this code which also eliminated the need for a "zero" position in the cteTally table. 
**********************************************************************************************************************/
--===== Define I/O parameters
        (@pString VARCHAR(8000), @pDelimiter CHAR(1))
RETURNS TABLE WITH SCHEMABINDING AS
 RETURN
--===== "Inline" CTE Driven "Tally Table" produces values from 0 up to 10,000...
     -- enough to cover NVARCHAR(4000)
  WITH E1(N) AS (
                 SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL 
                 SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL 
                 SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1
                ),                          --10E+1 or 10 rows
       E2(N) AS (SELECT 1 FROM E1 a, E1 b), --10E+2 or 100 rows
       E4(N) AS (SELECT 1 FROM E2 a, E2 b), --10E+4 or 10,000 rows max
 cteTally(N) AS (--==== This provides the "base" CTE and limits the number of rows right up front
                     -- for both a performance gain and prevention of accidental "overruns"
                 SELECT TOP (ISNULL(DATALENGTH(@pString),0)) ROW_NUMBER() OVER (ORDER BY (SELECT NULL)) FROM E4
                ),
cteStart(N1) AS (--==== This returns N+1 (starting position of each "element" just once for each delimiter)
                 SELECT 1 UNION ALL
                 SELECT t.N+1 FROM cteTally t WHERE SUBSTRING(@pString,t.N,1) = @pDelimiter
                ),
cteLen(N1,L1) AS(--==== Return start and length (for use in substring)
                 SELECT s.N1,
                        ISNULL(NULLIF(CHARINDEX(@pDelimiter,@pString,s.N1),0)-s.N1,8000)
                   FROM cteStart s
                )
--===== Do the actual split. The ISNULL/NULLIF combo handles the length for the final element when no delimiter is found.
 SELECT ItemNumber = ROW_NUMBER() OVER(ORDER BY l.N1),
        Item       = SUBSTRING(@pString, l.N1, l.L1)
   FROM cteLen l
;

GO

이것을 시도하십시오 ( ''를 '로 바꾸거나 사용하려는 구분 기호를 변경하십시오)

CREATE FUNCTION dbo.Wordparser
(
  @multiwordstring VARCHAR(255),
  @wordnumber      NUMERIC
)
returns VARCHAR(255)
AS
  BEGIN
      DECLARE @remainingstring VARCHAR(255)
      SET @remainingstring=@multiwordstring

      DECLARE @numberofwords NUMERIC
      SET @numberofwords=(LEN(@remainingstring) - LEN(REPLACE(@remainingstring, ' ', '')) + 1)

      DECLARE @word VARCHAR(50)
      DECLARE @parsedwords TABLE
      (
         line NUMERIC IDENTITY(1, 1),
         word VARCHAR(255)
      )

      WHILE @numberofwords > 1
        BEGIN
            SET @word=LEFT(@remainingstring, CHARINDEX(' ', @remainingstring) - 1)

            INSERT INTO @parsedwords(word)
            SELECT @word

            SET @remainingstring= REPLACE(@remainingstring, Concat(@word, ' '), '')
            SET @numberofwords=(LEN(@remainingstring) - LEN(REPLACE(@remainingstring, ' ', '')) + 1)

            IF @numberofwords = 1
              BREAK

            ELSE
              CONTINUE
        END

      IF @numberofwords = 1
        SELECT @word = @remainingstring
      INSERT INTO @parsedwords(word)
      SELECT @word

      RETURN
        (SELECT word
         FROM   @parsedwords
         WHERE  line = @wordnumber)

  END

사용법 예 :

SELECT dbo.Wordparser(COLUMN, 1),
       dbo.Wordparser(COLUMN, 2),
       dbo.Wordparser(COLUMN, 3)
FROM   TABLE

SQL Server 2016에서는 string_split을 사용하여 다음을 수행 할 수 있습니다.

create table commasep (
 id int identity(1,1)
 ,string nvarchar(100) )

insert into commasep (string) values ('John, Adam'), ('test1,test2,test3')

select id, [value] as String from commasep 
 cross apply string_split(string,',')

PARSENAME 은이 기사에서 설명하는 것처럼이 예제에 사용하는 깔끔한 기능이라고 생각합니다. http://www.sqlshack.com/parsing-and-rotating-delimited-data-in-sql-server-2012/

PARSENAME 함수는 논리적으로 네 부분으로 된 객체 이름을 구문 분석하도록 설계되었습니다. PARSENAME의 장점은 SQL Server의 네 부분으로 된 개체 이름을 구문 분석하는 것에 만 국한되지 않고 점으로 구분 된 함수 또는 문자열 데이터를 구문 분석한다는 것입니다.

첫 번째 매개 변수는 구문 분석 할 개체이고 두 번째 매개 변수는 반환 할 개체 조각의 정수 값입니다. 이 기사에서는 구분 된 데이터 (회사 전화 번호 분석 및 회전)에 대해 설명하지만 이름 / 성 데이터를 구문 분석하는 데 사용할 수도 있습니다.

예:

USE COMPANY;
SELECT PARSENAME('Whatever.you.want.parsed',3) AS 'ReturnValue';

이 기사는 또한 'replaceChars'라는 CTE (Common Table Expression)를 사용하여 구분 기호로 대체 된 값에 대해 PARSENAME을 실행하는 방법을 설명합니다. CTE는 임시 뷰 또는 결과 집합을 반환하는 데 유용합니다.

그 후 UNPIVOT 함수는 일부 열을 행으로 변환하는 데 사용되었습니다. SUBSTRING 및 CHARINDEX 함수는 데이터의 불일치를 정리하는 데 사용되었으며, 이전 레코드를 참조 할 수 있으므로 LAG 함수 (SQL Server 2012의 새로운 기능)가 결국 사용되었습니다.

SELECT id,
       Substring(NAME, 0, Charindex(',', NAME))             AS firstname,
       Substring(NAME, Charindex(',', NAME), Len(NAME) + 1) AS lastname
FROM   spilt  

이렇게 함수를 만들 수 있습니다

CREATE Function [dbo].[fn_CSVToTable] 
(
    @CSVList Varchar(max)
)
RETURNS @Table TABLE (ColumnData VARCHAR(100))
AS
BEGIN
    IF RIGHT(@CSVList, 1) <> ','
    SELECT @CSVList = @CSVList + ','

    DECLARE @Pos    BIGINT,
            @OldPos BIGINT
    SELECT  @Pos    = 1,
            @OldPos = 1

    WHILE   @Pos < LEN(@CSVList)
        BEGIN
            SELECT  @Pos = CHARINDEX(',', @CSVList, @OldPos)
            INSERT INTO @Table
            SELECT  LTRIM(RTRIM(SUBSTRING(@CSVList, @OldPos, @Pos - @OldPos))) Col001

            SELECT  @OldPos = @Pos + 1
        END

    RETURN
END

그런 다음 SELECT 문을 사용하여 CSV 값을 해당 열로 분리 할 수 ​​있습니다

다음 기능이 효과가 있다고 생각합니다.

먼저 SQL에서 함수를 작성해야합니다. 이렇게

CREATE FUNCTION [dbo].[fn_split](
@str VARCHAR(MAX),
@delimiter CHAR(1)
)
RETURNS @returnTable TABLE (idx INT PRIMARY KEY IDENTITY, item VARCHAR(8000))
AS
BEGIN
DECLARE @pos INT
SELECT @str = @str + @delimiter
WHILE LEN(@str) > 0 
    BEGIN
        SELECT @pos = CHARINDEX(@delimiter,@str)
        IF @pos = 1
            INSERT @returnTable (item)
                VALUES (NULL)
        ELSE
            INSERT @returnTable (item)
                VALUES (SUBSTRING(@str, 1, @pos-1))
        SELECT @str = SUBSTRING(@str, @pos+1, LEN(@str)-@pos)       
    END
RETURN
END

이 함수를 다음과 같이 호출 할 수 있습니다.

select * from fn_split('1,24,5',',')

이행:

Declare @test TABLE (
ID VARCHAR(200),
Data VARCHAR(200)
)

insert into @test 
(ID, Data)
Values
('1','Cleo,Smith')


insert into @test 
(ID, Data)
Values
('2','Paul,Grim')

select ID,
(select item from fn_split(Data,',') where idx in (1)) as Name ,
(select item from fn_split(Data,',') where idx in (2)) as Surname
 from @test

결과는 다음과 같습니다.

호환성 수준 130에서만 사용할 수 있는 테이블 반환 함수 STRING_SPLIT를 사용할 수 있습니다. 데이터베이스 호환성 수준이 130보다 낮 으면 SQL Server에서 STRING_SPLIT함수 를 찾아서 실행할 수 없습니다 . 다음 명령을 사용하여 데이터베이스의 호환성 수준을 변경할 수 있습니다.

ALTER DATABASE DatabaseName SET COMPATIBILITY_LEVEL = 130

통사론

SELECT * FROM STRING_SPLIT ( string, separator )

여기 문서를 참조하십시오

Parsename () 함수 사용

with cte as(
    select 'Aria,Karimi' as FullName
    Union
    select 'Joe,Karimi' as FullName
    Union
    select 'Bab,Karimi' as FullName
)

SELECT PARSENAME(REPLACE(FullName,',','.'),2) as Name, 
       PARSENAME(REPLACE(FullName,',','.'),1) as Family
    FROM cte

결과

Name    Family
-----   ------
Aria    Karimi
Bab     Karimi
Joe     Karimi

이 시도:

declare @csv varchar(100) ='aaa,bb,csda,daass';
set @csv = @csv+',';

with cte as
(
    select SUBSTRING(@csv,1,charindex(',',@csv,1)-1) as val, SUBSTRING(@csv,charindex(',',@csv,1)+1,len(@csv)) as rem 
    UNION ALL
    select SUBSTRING(a.rem,1,charindex(',',a.rem,1)-1)as val, SUBSTRING(a.rem,charindex(',',a.rem,1)+1,len(A.rem)) 
    from cte a where LEN(a.rem)>=1
    ) select val from cte

비슷한 문제가 발생했지만 복잡한 문제가 발생했습니다.이 문제와 관련하여 찾은 첫 번째 스레드이므로 결과를 게시하기로 결정했습니다. 나는 그것이 간단한 문제에 대한 복잡한 해결책이라는 것을 알고 있지만이 스레드에가 다른 사람들이 더 복잡한 해결책을 찾고 있도록 도울 수 있기를 바랍니다. 5 개의 숫자 (열 이름 : levelsFeed)가 포함 된 문자열을 분할하고 각 숫자를 별도의 열에 표시해야했습니다. 예를 들어, 8,1,2,2,2는 다음과 같이 표시되어야합니다.

1  2  3  4  5
-------------
8  1  2  2  2

솔루션 1 : XML 기능 사용 :이 솔루션은 지금까지 가장 느린 솔루션

SELECT Distinct FeedbackID, 
, S.a.value('(/H/r)[1]', 'INT') AS level1
, S.a.value('(/H/r)[2]', 'INT') AS level2
, S.a.value('(/H/r)[3]', 'INT') AS level3
, S.a.value('(/H/r)[4]', 'INT') AS level4
, S.a.value('(/H/r)[5]', 'INT') AS level5
FROM (            
    SELECT *,CAST (N'<H><r>' + REPLACE(levelsFeed, ',', '</r><r>')  + '</r> </H>' AS XML) AS [vals]
    FROM Feedbacks 
)  as d
CROSS APPLY d.[vals].nodes('/H/r') S(a)

해결책 2 : 분할 기능 및 피벗 사용. (분할 함수는 문자열을 열 이름이 Data 인 행으로 분할합니다)

SELECT FeedbackID, [1],[2],[3],[4],[5]
FROM (
    SELECT *, ROW_NUMBER() OVER (PARTITION BY feedbackID ORDER BY (SELECT  null)) as rn 
FROM (
    SELECT FeedbackID, levelsFeed
    FROM Feedbacks 
) as a
CROSS APPLY dbo.Split(levelsFeed, ',')
) as SourceTable
PIVOT
(
    MAX(data)
    FOR rn IN ([1],[2],[3],[4],[5])
)as pivotTable

솔루션 3 : 문자열 조작 기능 사용-솔루션 2보다 작은 마진으로 가장 빠름

SELECT FeedbackID,
SUBSTRING(levelsFeed,0,CHARINDEX(',',levelsFeed)) AS level1,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),4) AS level2,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),3) AS level3,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),2) AS level4,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),1) AS level5
FROM Feedbacks

levelsFeed에 5 개의 문자열 값이 포함되어 있기 때문에 첫 번째 문자열에 하위 문자열 함수를 사용해야했습니다.

내 솔루션 이이 스레드에있는 다른 사람들이 더 복잡한 열 방식으로 나누기를 도울 수 있기를 바랍니다.

instring 함수 사용 :)

select Value, 
       substring(String,1,instr(String," ") -1) Fname,  
       substring(String,instr(String,",") +1) Sname 
from tablename;

두 개의 함수를 사용했습니다
. 1 substring(string, position, length) ==>는 문자열을 위치에서 길이
2로 instr(string,pattern)반환합니다 . ==>는 패턴의 위치를 ​​반환합니다.

하위 문자열에 길이 인수를 제공하지 않으면 문자열 끝까지 반환

이 기능은 가장 빠릅니다.

CREATE FUNCTION dbo.F_ExtractSubString
(
  @String VARCHAR(MAX),
  @NroSubString INT,
  @Separator VARCHAR(5)
)
RETURNS VARCHAR(MAX) AS
BEGIN
    DECLARE @St INT = 0, @End INT = 0, @Ret VARCHAR(MAX)
    SET @String = @String + @Separator
    WHILE CHARINDEX(@Separator, @String, @End + 1) > 0 AND @NroSubString > 0
    BEGIN
        SET @St = @End + 1
        SET @End = CHARINDEX(@Separator, @String, @End + 1)
        SET @NroSubString = @NroSubString - 1
    END
    IF @NroSubString > 0
        SET @Ret = ''
    ELSE
        SET @Ret = SUBSTRING(@String, @St, @End - @St)
    RETURN @Ret
END
GO

사용법 예 :

SELECT dbo.F_ExtractSubString(COLUMN, 1, ', '),
       dbo.F_ExtractSubString(COLUMN, 2, ', '),
       dbo.F_ExtractSubString(COLUMN, 3, ', ')
FROM   TABLE

이것은 나를 위해 일했다

CREATE FUNCTION [dbo].[SplitString](
    @delimited NVARCHAR(MAX),
    @delimiter NVARCHAR(100)
) RETURNS @t TABLE ( val NVARCHAR(MAX))
AS
BEGIN
    DECLARE @xml XML
    SET @xml = N'<t>' + REPLACE(@delimited,@delimiter,'</t><t>') + '</t>'
    INSERT INTO @t(val)
    SELECT  r.value('.','varchar(MAX)') as item
    FROM  @xml.nodes('/t') as records(r)
    RETURN
END

mytable :

Value  ColOne
--------------------
1      Cleo, Smith

열이 너무 많지 않으면 다음이 작동합니다.

ALTER TABLE mytable ADD ColTwo nvarchar(256);
UPDATE mytable SET ColTwo = LEFT(ColOne, Charindex(',', ColOne) - 1);
--'Cleo' = LEFT('Cleo, Smith', Charindex(',', 'Cleo, Smith') - 1)
UPDATE mytable SET ColTwo = REPLACE(ColOne, ColTwo + ',', '');
--' Smith' = REPLACE('Cleo, Smith', 'Cleo' + ',')
UPDATE mytable SET ColOne = REPLACE(ColOne, ',' + ColTwo, ''), ColTwo = LTRIM(ColTwo);
--'Cleo' = REPLACE('Cleo, Smith', ',' + ' Smith', '') 

결과:

Value  ColOne ColTwo
--------------------
1      Cleo   Smith

너무 쉽습니다. 아래 쿼리로 가져갈 수 있습니다.

DECLARE @str NVARCHAR(MAX)='ControlID_05436b78-04ba-9667-fa01-9ff8c1b7c235,3'
SELECT LEFT(@str, CHARINDEX(',',@str)-1),RIGHT(@str,LEN(@str)-(CHARINDEX(',',@str)))

DECLARE @INPUT VARCHAR (MAX)='N,A,R,E,N,D,R,A'
DECLARE @ELIMINATE_CHAR CHAR (1)=','
DECLARE @L_START INT=1
DECLARE @L_END INT=(SELECT LEN (@INPUT))
DECLARE @OUTPUT CHAR (1)

WHILE @L_START <=@L_END
BEGIN
    SET @OUTPUT=(SUBSTRING (@INPUT,@L_START,1))
    IF @OUTPUT!=@ELIMINATE_CHAR
    BEGIN
        PRINT @OUTPUT
    END
    SET @L_START=@L_START+1
END

구분 된 문자열을 구문 분석하는 SQL User Defined Function 의 솔루션이 도움이 될 수 있습니다 ( 코드 프로젝트 ).

다음은이 페이지의 코드 부분입니다.

CREATE FUNCTION [fn_ParseText2Table]
  (@p_SourceText VARCHAR(MAX)
  ,@p_Delimeter VARCHAR(100)=',' --default to comma delimited.
  )
 RETURNS @retTable
  TABLE([Position] INT IDENTITY(1,1)
   ,[Int_Value] INT
   ,[Num_Value] NUMERIC(18,3)
   ,[Txt_Value] VARCHAR(MAX)
   ,[Date_value] DATETIME
   )
AS
/*
********************************************************************************
Purpose: Parse values from a delimited string
  & return the result as an indexed table
Copyright 1996, 1997, 2000, 2003 Clayton Groom (<A href="mailto:Clayton_Groom@hotmail.com">Clayton_Groom@hotmail.com</A>)
Posted to the public domain Aug, 2004
2003-06-17 Rewritten as SQL 2000 function.
 Reworked to allow for delimiters > 1 character in length
 and to convert Text values to numbers
2016-04-05 Added logic for date values based on "new" ISDATE() function, Updated to use XML approach, which is more efficient.
********************************************************************************
*/


BEGIN
 DECLARE @w_xml xml;
 SET @w_xml = N'<root><i>' + replace(@p_SourceText, @p_Delimeter,'</i><i>') + '</i></root>';


 INSERT INTO @retTable
     ([Int_Value]
    , [Num_Value]
    , [Txt_Value]
    , [Date_value]
     )
     SELECT CASE
       WHEN ISNUMERIC([i].value('.', 'VARCHAR(MAX)')) = 1
       THEN CAST(CAST([i].value('.', 'VARCHAR(MAX)') AS NUMERIC) AS INT)
      END AS [Int_Value]
    , CASE
       WHEN ISNUMERIC([i].value('.', 'VARCHAR(MAX)')) = 1
       THEN CAST([i].value('.', 'VARCHAR(MAX)') AS NUMERIC(18, 3))
      END AS [Num_Value]
    , [i].value('.', 'VARCHAR(MAX)') AS [txt_Value]
    , CASE
       WHEN ISDATE([i].value('.', 'VARCHAR(MAX)')) = 1
       THEN CAST([i].value('.', 'VARCHAR(MAX)') AS DATETIME)
      END AS [Num_Value]
     FROM @w_xml.nodes('//root/i') AS [Items]([i]);
 RETURN;
END;
GO

ALTER function get_occurance_index(@delimiter varchar(1),@occurence int,@String varchar(100))
returns int
AS Begin
--Declare @delimiter varchar(1)=',',@occurence int=2,@String varchar(100)='a,b,c'
Declare @result int
 ;with T as (
    select 1 Rno,0 as row, charindex(@delimiter, @String) pos,@String st
    union all
    select Rno+1,pos + 1, charindex(@delimiter, @String, pos + 1), @String
    from T
    where pos > 0
)
select  @result=pos 
from T 
where pos > 0   and rno = @occurence 
return isnull(@result,0)
ENd


declare @data as table (data varchar(100))
insert into @data values('1,2,3') 
insert into @data values('aaa,bbbbb,cccc') 
select top  3 Substring (data,0,dbo.get_occurance_index( ',',1,data)) ,--First Record always starts with 0
Substring (data,dbo.get_occurance_index( ',',1,data)+1,dbo.get_occurance_index( ',',2,data)-dbo.get_occurance_index( ',',1,data)-1) ,
Substring (data,dbo.get_occurance_index( ',',2,data)+1,len(data)) , -- Last record cant be more than len of actual data
data 
From @data 

위와 같이 PARSENAME을 사용하면 마침표가있는 이름이 null로 나타납니다.

따라서 이름에 이니셜이나 제목이 있고 그 뒤에 점이 있으면 NULL을 반환합니다.

나는 이것이 나를 위해 일한 것을 발견했다.

SELECT 
REPLACE(SUBSTRING(FullName, 1,CHARINDEX(',', FullName)), ',','') as Name,
REPLACE(SUBSTRING(FullName, CHARINDEX(',', FullName), LEN(FullName)), ',', '') as Surname
FROM Table1

select distinct modelFileId,F4.*
from contract
cross apply (select XmlList=convert(xml, '<x>'+replace(modelFileId,';','</x><x>')+'</x>').query('.')) F2
cross apply (select mfid1=XmlNode.value('/x[1]','varchar(512)')
,mfid2=XmlNode.value('/x[2]','varchar(512)')
,mfid3=XmlNode.value('/x[3]','varchar(512)')
,mfid4=XmlNode.value('/x[4]','varchar(512)') from XmlList.nodes('x') F3(XmlNode)) F4
where modelFileId like '%;%'
order by modelFileId

Select distinct PROJ_UID,PROJ_NAME,RES_UID from E2E_ProjectWiseTimesheetActuals
where   CHARINDEX(','+cast(PROJ_UID as varchar(8000))+',', @params) > 0 and  CHARINDEX(','+cast(RES_UID as varchar(8000))+',', @res) > 0

위의 답변을 다시 작성하고 더 좋게 만들었습니다.

CREATE FUNCTION [dbo].[CSVParser]
(
  @s        VARCHAR(255),
  @idx      NUMERIC
)
RETURNS VARCHAR(12)
BEGIN
    DECLARE @comma int
    SET @comma = CHARINDEX(',', @s)
    WHILE 1=1
    BEGIN
        IF @comma=0
            IF @idx=1
                RETURN @s
            ELSE
                RETURN ''

        IF @idx=1
        BEGIN
            DECLARE @word VARCHAR(12)
            SET @word=LEFT(@s, @comma - 1)
            RETURN @word
        END

        SET @s = RIGHT(@s,LEN(@s)-@comma)
        SET @comma = CHARINDEX(',', @s)
        SET @idx = @idx - 1
    END
    RETURN 'not used'
END

사용법 예 :

SELECT dbo.CSVParser(COLUMN, 1),
       dbo.CSVParser(COLUMN, 2),
       dbo.CSVParser(COLUMN, 3)
FROM   TABLE

CREATE FUNCTION [dbo].[fnSplit](@sInputList VARCHAR(8000), @sDelimiter VARCHAR(8000) = ',')
RETURNS @List TABLE (item VARCHAR(8000))
BEGIN

    DECLARE @sItem VARCHAR(8000)
    WHILE CHARINDEX(@sDelimiter, @sInputList, 0) <> 0
    BEGIN

        SELECT @sItem = RTRIM(LTRIM(SUBSTRING(@sInputList, 1, CHARINDEX(@sDelimiter, @sInputList,0) - 1))),
               @sInputList = RTRIM(LTRIM(SUBSTRING(@sInputList, CHARINDEX(@sDelimiter, @sInputList, 0) + LEN(@sDelimiter),LEN(@sInputList))))

        -- Indexes to keep the position of searching
        IF LEN(@sItem) > 0

        INSERT INTO @List SELECT @sItem

    END

    IF LEN(@sInputList) > 0
    BEGIN

        INSERT INTO @List SELECT @sInputList -- Put the last item in

    END

    RETURN

END