df가 RAID10 어레이 크기의 절반 만 표시하는 이유는 무엇입니까?

150G 스토리지를 만들기 위해 4 개의 75G 드라이브를 사용하여 RAID10 어레이를 만들었습니다.
모든 작업이 완료된 후 (초기 동기화 포함) 출력이 df -h지정된 마운트 지점에 73G 스토리지 만 표시 한 것을 제외하고는 모든 것이 양호 해졌습니다.

세부:

• 머신은 Amazon EC2의 m1.large Ubuntu 11.10 인스턴스입니다.
• 4 개의 드라이브는 EBS 드라이브이며 각각 75G 크기입니다.
• RAID10 어레이는 다음 스크립트를 사용하여 작성되었습니다.

-

#!/bin/sh

disk1="/dev/sdh1"
disk2="/dev/sdh2"
disk3="/dev/sdh3"
disk4="/dev/sdh4"

echo "*** Verifying existence of 4 volumes $disk1, $disk2, $disk3 and $disk4"
if [ -b "$disk1" -a -b "$disk2" -a -b "$disk3" -a -b "$disk4" ]; then
    echo "# Found expected block devices."
else
    echo "!!! Did not find expected block devices.  Error."
    exit -1
fi
until read -p "??? - How big (in GB) are the disks (They should be the same size)?  " disk_size && [ $disk_size ]; do
    echo "Please enter a disk size."
done 

lv_size=$(echo "scale=2; $disk_size * 2.0" | bc)
echo "*** Assuming a per disk size of $disk_size gigs, will create a logical volume of $lv_size gigs, with $lv_size reserved for snapshots"

echo "*** Partitioning disks..."

echo "~ Partitioning $disk1"
echo ',,L' | sfdisk $disk1
echo "~ Partitioning $disk2"
echo ',,L' | sfdisk $disk2
echo "~ Partitioning $disk3"
echo ',,L' | sfdisk $disk3
echo "~ Partitioning $disk4"
echo ',,L' | sfdisk $disk4

sleep 6
echo "*** Creating /dev/md0 as a RAID 10"

/sbin/mdadm /dev/md0 --create --level=10 --raid-devices=4 $disk1 $disk2 $disk3 $disk4 

echo " ~ Allocating /dev/md0 as a physical volume."

/sbin/pvcreate /dev/md0

echo " ~ Allocating a Volume Group 'mongodb_vg'"

/sbin/vgcreate -s 64M mongodb_vg /dev/md0

echo " ~ Creating a Logical Volume 'mongodb_lv'"

num_extents=$(echo "$disk_size * 1000 / 64" | bc)

/sbin/lvcreate -l $num_extents -nmongodb_lv mongodb_vg

echo " ~ Formatting the new volume (/dev/mongodb_vg/mongodb_lv) with EXT4"

/sbin/mkfs.ext4 /dev/mongodb_vg/mongodb_lv

echo " ~ Done! Go ahead and mount the new filesystem.  Suggested FStab: "
echo " /dev/mongodb_vg/mongodb_lv /data ext4 defaults,noatime 0 0"

이것은 내가 얻은 출력입니다.

*** Verifying existence of 4 volumes /dev/xvdh1, /dev/xvdh2, /dev/xvdh3 and /dev/xvdh4
# Found expected block devices.
??? - How big (in GB) are the disks (They should be the same size)?  75
*** Assuming a per disk size of 75 gigs, will create a logical volume of 150.0 gigs, with 150.0 reserved for snapshots
*** Partitioning disks...
~ Partitioning /dev/xvdh1
Checking that no-one is using this disk right now ...
BLKRRPART: Invalid argument
OK

Disk /dev/xvdh1: 9790 cylinders, 255 heads, 63 sectors/track

sfdisk: ERROR: sector 0 does not have an msdos signature
 /dev/xvdh1: unrecognized partition table type
Old situation:   
No partitions found
New situation:   
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0

   Device Boot Start     End   #cyls    #blocks   Id  System
/dev/xvdh1p1          0+   9789    9790-  78638174+  83  Linux
/dev/xvdh1p2          0       -       0          0    0  Empty
/dev/xvdh1p3          0       -       0          0    0  Empty
/dev/xvdh1p4          0       -       0          0    0  Empty
Warning: no primary partition is marked bootable (active)
This does not matter for LILO, but the DOS MBR will not boot this disk.
Successfully wrote the new partition table

Re-reading the partition table ...
BLKRRPART: Invalid argument

If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)  
~ Partitioning /dev/xvdh2
Checking that no-one is using this disk right now ...
BLKRRPART: Invalid argument
OK

Disk /dev/xvdh2: 9790 cylinders, 255 heads, 63 sectors/track

sfdisk: ERROR: sector 0 does not have an msdos signature
 /dev/xvdh2: unrecognized partition table type
   Old situation:   
No partitions found
New situation:   
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0

   Device Boot Start     End   #cyls    #blocks   Id  System
/dev/xvdh2p1          0+   9789    9790-  78638174+  83  Linux
/dev/xvdh2p2          0       -       0          0    0  Empty
/dev/xvdh2p3          0       -       0          0    0  Empty
/dev/xvdh2p4          0       -       0          0    0  Empty
Warning: no primary partition is marked bootable (active)
This does not matter for LILO, but the DOS MBR will not boot this disk.
Successfully wrote the new partition table

Re-reading the partition table ...
BLKRRPART: Invalid argument

If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)  
~ Partitioning /dev/xvdh3
Checking that no-one is using this disk right now ...
BLKRRPART: Invalid argument
OK

Disk /dev/xvdh3: 9790 cylinders, 255 heads, 63 sectors/track

sfdisk: ERROR: sector 0 does not have an msdos signature
 /dev/xvdh3: unrecognized partition table type
Old situation:   
No partitions found
New situation:   
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0

   Device Boot Start     End   #cyls    #blocks   Id  System
/dev/xvdh3p1          0+   9789    9790-  78638174+  83  Linux
/dev/xvdh3p2          0       -       0          0    0  Empty
/dev/xvdh3p3          0       -       0          0    0  Empty
/dev/xvdh3p4          0       -       0          0    0  Empty
Warning: no primary partition is marked bootable (active)
This does not matter for LILO, but the DOS MBR will not boot this disk.
Successfully wrote the new partition table

Re-reading the partition table ...
BLKRRPART: Invalid argument
If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)  
~ Partitioning /dev/xvdh4
Checking that no-one is using this disk right now ...
BLKRRPART: Invalid argument
OK

Disk /dev/xvdh4: 9790 cylinders, 255 heads, 63 sectors/track

sfdisk: ERROR: sector 0 does not have an msdos signature
 /dev/xvdh4: unrecognized partition table type
Old situation:   
No partitions found
New situation:   
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0

   Device Boot Start     End   #cyls    #blocks   Id  System
/dev/xvdh4p1          0+   9789    9790-  78638174+  83  Linux
/dev/xvdh4p2          0       -       0          0    0  Empty
/dev/xvdh4p3          0       -       0          0    0  Empty
/dev/xvdh4p4          0       -       0          0    0  Empty
Warning: no primary partition is marked bootable (active)
This does not matter for LILO, but the DOS MBR will not boot this disk.
Successfully wrote the new partition table

Re-reading the partition table ...
BLKRRPART: Invalid argument

If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)  
*** Creating /dev/md0 as a RAID 10
mdadm: partition table exists on /dev/xvdh1 but will be lost or
       meaningless after creating array
mdadm: partition table exists on /dev/xvdh2 but will be lost or
       meaningless after creating array
mdadm: partition table exists on /dev/xvdh3 but will be lost or
       meaningless after creating array
mdadm: partition table exists on /dev/xvdh4 but will be lost or
       meaningless after creating array
Continue creating array? y
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
 ~ Allocating /dev/md0 as a physical volume.

  Physical volume "/dev/md0" successfully created
 ~ Allocating a Volume Group 'mongodb_vg'
  Volume group "mongodb_vg" successfully created
 ~ Creating a Logical Volume 'mongodb_lv'
  Logical volume "mongodb_lv" created
 ~ Formatting the new volume (/dev/mongodb_vg/mongodb_lv) with EXT4
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux   
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=128 blocks, Stripe width=256 blocks
4800512 inodes, 19185664 blocks
959283 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
586 block groups 
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
        4096000, 7962624, 11239424

Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 36 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
 ~ Done! Go ahead and mount the new filesystem.  Suggested FStab:
 /dev/mongodb_vg/mongodb_lv /data ext4 defaults,noatime 0 0

이것은 다음의 관련 출력입니다 df -h.

Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/mongodb_vg-mongodb_lv
                       73G  180M   69G   1% /ebsRaid

이 결과는 mdadm --detail /dev/md0

/dev/md0:
        Version : 1.2
  Creation Time : Wed Feb 29 10:14:39 2012
     Raid Level : raid10
     Array Size : 157283328 (150.00 GiB 161.06 GB)
  Used Dev Size : 78641664 (75.00 GiB 80.53 GB)
   Raid Devices : 4
  Total Devices : 4
    Persistence : Superblock is persistent

    Update Time : Wed Feb 29 13:21:49 2012
          State : clean
 Active Devices : 4
Working Devices : 4
 Failed Devices : 0
  Spare Devices : 0

         Layout : near=2
     Chunk Size : 512K

           Name : my.site.com:0  (local to host my.site.com)
           UUID : CENSORED
         Events : 19

    Number   Major   Minor   RaidDevice State
       0     202      113        0      active sync   /dev/xvdh1
       1     202      114        1      active sync   /dev/xvdh2
       2     202      115        2      active sync   /dev/xvdh3
       3     202      116        3      active sync   /dev/xvdh4

이것은 다음의 출력입니다 cat /proc/mdstat.

Personalities : [raid10] 
md0 : active raid10 xvdh4[3] xvdh3[2] xvdh2[1] xvdh1[0]
      157283328 blocks super 1.2 512K chunks 2 near-copies [4/4] [UUUU]

unused devices: <none>

편집 1 :

이것은 lvdisplay -m의 출력입니다.

  --- Logical volume ---
  LV Name                /dev/mongodb_vg/mongodb_lv
  VG Name                mongodb_vg
  LV UUID                SEpGth-cXd3-ZFhy-XLHo-T5pV-gEd1-Tgancs
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                73.19 GiB
  Current LE             1171
  Segments               1
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     4096
  Block device           252:0

  --- Segments ---
  Logical extent 0 to 1170:
    Type                linear
    Physical volume     /dev/md0
    Physical extents    0 to 1170

편집 2 :

이것은 다음의 출력입니다 vgdisplay.

  --- Volume group ---
  VG Name               mongodb_vg
  System ID             
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  2
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                1
  Open LV               1
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               149.94 GiB
  PE Size               64.00 MiB
  Total PE              2399
  Alloc PE / Size       1171 / 73.19 GiB
  Free  PE / Size       1228 / 76.75 GiB
  VG UUID               CENSORED

볼륨 그룹이 생성 된 익스텐트 전체를 사용하지 않습니다.

VG Size               149.94 GiB
PE Size               64.00 MiB
Total PE              2399
Alloc PE / Size       1171 / 73.19 GiB
Free  PE / Size       1228 / 76.75 GiB

다음 명령을 사용하여 범위를 더 추가 할 수 있습니다.

lvextend -l +100%FREE /dev/mongodb_vg/mongodb_lv /dev/md0

입력하기 전에 맨 페이지를 읽으십시오

이 명령은 남아있는 모든 FREE Extent를 사용하도록 볼륨 그룹을 확장합니다 (일부 Extent를 사용 가능하게하려면 덜 선택할 수도 있습니다). 이를 위해 md0의 범위를 사용합니다.

그런 다음 다음을 사용하여 온라인으로 파티션 크기를 조정할 수 있습니다.

resize2fs  /dev/mongodb_vg/mongodb_lv

그리고 온라인 크기를 조정하고 있다고 말해야합니다. 나는 이것이 당신의 문제를 해결할 것이라고 생각하지만 매뉴얼 페이지를 읽고 그들이 시도하기 전에 그들이 무엇을하고 있는지 이해하십시오. 난 당신이 당신의 디스크를 휴지통에 대한 책임을지지 않습니다.

또한 EBS의 RAID와 맨 위에 lvm은 디스크 가상화의 불필요한 수준처럼 보입니다. RAID를 추가하여 데이터의 성능과 안전성을 향상시키지 않습니다. LVM은 기억이 잘된다면 이미 미러링 / 스트라이핑을 수행합니다. 기술적으로 RAID 광고에서 LVM의 RAID에서 LVM을 실행할 수는 있지만 그렇게함으로써 많은 이익을 얻을 수 있을지는 모르겠습니다 (그러나 이것에 대해 잘못 지적한 것이 기쁘지만).