VMware vmnet2 경로가 en0과 충돌

방랑 상자를 시작할 때 다음 오류가 발생합니다.

gajus:vagrant gajus$ vagrant up
Bringing machine 'default' up with 'vmware_fusion' provider...
==> default: Checking if box 'puppetlabs/centos-6.5-64-puppet' is up to date...
==> default: Verifying vmnet devices are healthy...
The VMware network device 'vmnet2' can't be started because
its routes collide with another device: 'en0'. Please
either fix the settings of the VMware network device or stop the
colliding device. Your machine can't be started while VMware
networking is broken.

Routing to the IP '192.168.1.0' should route through 'vmnet2', but
instead routes through 'en0'.

이것은 내 ifconfig입니다.

sh-3.2# ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    options=3<RXCSUM,TXCSUM>
    inet6 ::1 prefixlen 128
    inet 127.0.0.1 netmask 0xff000000
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    nd6 options=1<PERFORMNUD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 60:03:08:a8:1e:ca
    inet6 fe80::6203:8ff:fea8:1eca%en0 prefixlen 64 scopeid 0x4
    inet 192.168.1.175 netmask 0xffffff00 broadcast 192.168.1.255
    nd6 options=1<PERFORMNUD>
    media: autoselect
    status: active
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    options=60<TSO4,TSO6>
    ether 72:00:01:ee:3a:20
    media: autoselect <full-duplex>
    status: inactive
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    options=60<TSO4,TSO6>
    ether 72:00:01:ee:3a:21
    media: autoselect <full-duplex>
    status: inactive
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
    ether 02:03:08:a8:1e:ca
    media: autoselect
    status: inactive
awdl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1452
    ether 32:df:40:67:6a:63
    inet6 fe80::30df:40ff:fe67:6a63%awdl0 prefixlen 64 scopeid 0x8
    nd6 options=1<PERFORMNUD>
    media: autoselect
    status: active
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=63<RXCSUM,TXCSUM,TSO4,TSO6>
    ether 62:03:08:8a:2b:00
    Configuration:
        id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
        maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
        root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
        ipfilter disabled flags 0x2
    member: en1 flags=3<LEARNING,DISCOVER>
            ifmaxaddr 0 port 5 priority 0 path cost 0
    member: en2 flags=3<LEARNING,DISCOVER>
            ifmaxaddr 0 port 6 priority 0 path cost 0
    nd6 options=1<PERFORMNUD>
    media: <unknown type>
    status: inactive

누구나 문제의 원인과 예방 방법을 설명 할 수 있습니까?

Vagrant 1.7.2 및 VMWare Fusion 6.0.6을 실행하는 OSX (10.10.2) 에서이 문제가 있었지만 오류 메시지가 나타납니다.

IP '192.168.1.0'으로 라우팅하려면 'vmnet3'을 통해 라우팅해야하지만 'en0'을 통해 라우팅해야합니다.

이 문제를 해결하려면 :

1. cd /Library/Preferences/VMware\ Fusion
2. 에서 님의 모든 언급을 제거 VMNET3했습니다 networking. (이를 수행하기 전에 파일을 백업해야합니다.)
3. cd <where your Vagrantfile is>
4. vagrant up

VM이 성공적으로 시작되었습니다.