나는 지금 꽤 오랫동안 우분투 18.04를 사용하고 있었고 오늘 아침까지 내 PC를 켜고 업데이트를 위해 터미널을 사용할 때까지 제대로 작동했습니다.
이것은의 출력입니다 sudo apt upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages were automatically installed and are no longer required:
libuchardet0 lollypop-portal mpv phantomjs python3-bs4 python3-html5lib
python3-lxml python3-pylast python3-pyxattr python3-webencodings rtmpdump
youtube-dl
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
26 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up python3 (3.6.5-3ubuntu1) ...
running python rtupdate hooks for python3.6...
E: py3compile:183: cannot create directory /usr/share/hplip/ui5/__pycache__: FileNotFoundError(2, 'No such file or directory')
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aboutdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aboutdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aligndialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aligndialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/cleandialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/cleandialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/colorcaldialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/colorcaldialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devicesetupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devicesetupdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/deviceuricombobox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devmgr5.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devmgr5_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devmgr_ext.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabgrouptable.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabnametable.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabwindow.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabwindow_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/faxsetupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/faxsetupdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/filetable.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/firmwaredialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/firmwaredialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/infodialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/infodialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/linefeedcaldialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/linefeedcaldialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/loadpapergroupbox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/makecopiesdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/makecopiesdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/mimetypesdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/mimetypesdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/nodevicesdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/nodevicesdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindiagnose.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindiagnose_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pluginlicensedialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pluginlicensedialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pqdiagdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pqdiagdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printernamecombobox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettings_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettingsdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettingsdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettingstoolbox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printtestpagedialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printtestpagedialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/queuesconf.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/readonlyradiobutton.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/sendfaxdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/sendfaxdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/settingsdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/settingsdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/setupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/setupdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/setupdialog_base5.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/systemtray.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/systrayframe.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/systrayframe_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/ui_utils.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/upgradedialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/upgradedialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/wifisetupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/wifisetupdialog_base.py'
error running python rtupdate hook hplip-data
dpkg: error processing package python3 (--configure):
installed python3 package post-installation script subprocess returned error exit status 4
dpkg: dependency problems prevent configuration of update-notifier-common:
update-notifier-common depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package update-notifier-common (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of idle:
idle depends on python3 (>= 3.6.5-3ubuntu1); however:
Package python3 is not configured yet.
dpkg: error processing package idle (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of python3-update-manager:
python3-update-manager depends on python3:any (>= 3.3.2-2~); however:
Package python3 is not configured yet.
dpkg: error processing package python3-update-manager (--configure):
dependency problems - leaving unconfigured
No apport report written because the error message indicates its a followup error from a previous failure.
No apport report written because the error message indicates its a followup error from a previous failure.
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent configuration of python3-dev:
python3-dev depends on python3 (= 3.6.5-3ubuntu1); however:
Package python3 is not configured yet.
dpkg: error processing package python3-dev (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent configuration of gnome-shell:
gnome-shell depends on python3; however:
Package python3 is not configured yet.
dpkg: error processing package gnome-shell (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent configuration of netplan.io:
netplan.io depends on python3; however:
Package python3 is not configured yet.
dpkg: error processing package netplan.io (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent configuration of nplan:
nplan depends on netplan.io; however:
Package netplan.io is not configured yet.
dpkg: error processing package nplan (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent configuration of update-notifier:
update-notifier depends on update-notifier-common (= 3.192.1.3); however:
Package update-notifier-common is not configured yet.
dpkg: error processing package update-notifier (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent configuration of unattended-upgrades:
unattended-upgrades depends on python3; however:
Package python3 is not configured yet.
dpkg: error processing package unattended-upgrades (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent configuration of idle3:
idle3 depends on python3 (>= 3.6.5-3ubuntu1); however:
Package python3 is not configured yet.
idle3 depends on idle (>= 3.6.5-3ubuntu1); however:
Package idle is not configured yet.
dpkg: error processing package idle3 (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent configuration of update-manager:
update-manager depends on python3:any (>= 3.3.2-2~); however:
Package python3 is not configured yet.
update-manager depends on update-notifier; however:
Package update-notifier is not configured yet.
update-manager depends on policykit-1-gnome | polkit-kde-agent-1 | lxpolkit | lxqt-policykit | mate-polkit | polkit-1-auth-agent; however:
Package policykit-1-gnome is not installed.
Package polkit-kde-agent-1 is not installed.
Package lxpolkit is not installed.
Package lxqt-policykit is not installed.
Package mate-polkit is not installed.
Package polkit-1-auth-agent is not installed.
Package gnome-shell which provides polkit-1-auth-agent is not configured yet.
dpkg: error processing package update-manager (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gnome-menus:
gnome-menus depends on python3:any (>= 3.1~); however:
Package python3 is not configured yet.
dpkg: error processing package gnome-menus (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent configuration of update-manager-core:
update-manager-core depends on python3:any (>= 3.2~); however:
Package python3 is not configured yet.
update-manager-core depends on python3-update-manager (= 1:18.04.11.3); however:
Package python3-update-manager is not configured yet.
dpkg: error processing package update-manager-core (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent configuration of gdm3:
gdm3 depends on gnome-shell (>= 3.19.92); however:
Package gnome-shell is not configured yet.
dpkg: error processing package gdm3 (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
Package python3 is not configured yet.
dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: too many errors, stopping
No apport report written because MaxReports is reached already
Errors were encountered while processing:
python3
update-notifier-common
idle
python3-update-manager
python3-dev
gnome-shell
netplan.io
nplan
update-notifier
unattended-upgrades
idle3
update-manager
gnome-menus
update-manager-core
gconf2
gdm3
Processing was halted because there were too many errors.
E: Sub-process /usr/bin/dpkg returned an error code (1)
나는 다른 게시물을 찾았 지만 질문을하지 않고 그것에 대해 언급 할 수 없으므로 여기에 내 문제가 있습니다. 도움을 주시면 감사하겠습니다. 나는 또한 apt-cache policy hplip다른 게시물에서 요청 한대로 실행 하고 동일한 결과를 얻었습니다.
]hplip:
Installed: 3.17.10+repack0-5
Candidate: 3.17.10+repack0-5
Version table:
*** 3.17.10+repack0-5 500
500 http://in.archive.ubuntu.com/ubuntu bionic/main amd64 Packages
100 /var/lib/dpkg/status
HPLIP를 어떻게 설치 했습니까?
—
N0rbert
@ N0rbert HP 공식 웹 사이트에서 여기에 설치했습니다 : developers.hp.com/hp-linux-imaging-and-printing/gethplip 실제로 며칠 전에 설치했습니다
—
pennywise666
어떤 가이드를 사용하셨습니까? 일반적으로 deb-packaged 및 binary 버전은 충돌합니다. 따라서 바이너리 버전을 설치하기 전에 hplip deb 패키지를 제거해야합니다.
—
N0rbert
@ N0rbert 나는 그것이 제공 한 Sourceforge 링크에서 .run 파일을 다운로드 했으므로 바이너리 버전이었습니다. 바이너리 버전을 설치하기 전에 deb 패키지가 이미 설치되어 있다고 생각하지 않습니다.
—
pennywise666
로 깨진
—
N0rbert
hplip-data패키지를 제거해야합니다 sudo apt-get purge hplip-data.