Hostapd 드롭 아웃

우분투 12.04를 사용하여 몇 가지 사용법을 따르는 hostapd를 액세스 포인트로 구성했습니다. 모든 것이 최대 몇 시간 동안 잘 작동하고 어느 시점에서 hostapd는 더 이상 새로운 연결을 허용하지 않습니다.

hostapd 설정은 다음과 같습니다 :

ssid=PNN
wpa_passphrase=somePassphrase
interface=wlan2
bridge=br0
auth_algs=3
channel=7
driver=nl80211
hw_mode=g
logger_stdout=-1
logger_stdout_level=2
max_num_sta=255
rsn_pairwise=CCMP
wpa=2
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP CCMP

의 출력 사용

hostapd -dd /etc/hostapd/hostapd.conf

정상적인 상황에서는 다음과 같이 새 연결이 선택됩니다.

mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for our SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
Unknown Microsoft information element ignored (type=8 len=7)

STA 3c:d0:f8:10:0f:f0 sent probe request for broadcast SSID
mgmt::auth
authentication: STA=40:a6:d9:a5:63:dd auth_alg=0 auth_transaction=1 status_code=0 wep=0
  New STA
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: authentication OK (open system)
wlan2: STA 40:a6:d9:a5:63:dd MLME: MLME-AUTHENTICATE.indication(40:a6:d9:a5:63:dd, OPEN_SYSTEM)
wlan2: STA 40:a6:d9:a5:63:dd MLME: MLME-DELETEKEYS.request(40:a6:d9:a5:63:dd)
authentication reply: STA=40:a6:d9:a5:63:dd auth_alg=0 auth_transaction=2 resp=0 (IE len=0)
mgmt::proberesp cb
mgmt::auth cb
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: authenticated
mgmt::assoc_req
association request: STA=40:a6:d9:a5:63:dd capab_info=0x431 listen_interval=10
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
  new AID 1
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: association OK (aid 1)
mgmt::assoc_resp cb
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: associated (aid 1)
wlan2: STA 40:a6:d9:a5:63:dd MLME: MLME-ASSOCIATE.indication(40:a6:d9:a5:63:dd)
wlan2: STA 40:a6:d9:a5:63:dd MLME: MLME-DELETEKEYS.request(40:a6:d9:a5:63:dd)
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x216f2b0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=40:a6:d9:a5:63:dd
wlan2: STA 40:a6:d9:a5:63:dd WPA: event 1 notification
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x216f2b0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=40:a6:d9:a5:63:dd
wlan2: STA 40:a6:d9:a5:63:dd WPA: start authentication
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x216f2b0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=40:a6:d9:a5:63:dd
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.1X: unauthorizing port
WPA: 40:a6:d9:a5:63:dd WPA_PTK_GROUP entering state IDLE
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state AUTHENTICATION
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state AUTHENTICATION2
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state INITPSK
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKSTART
wlan2: STA 40:a6:d9:a5:63:dd WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0)
nl80211: Event message available
nl80211: Ignored unknown event (cmd=19)
IEEE 802.1X: 40:a6:d9:a5:63:dd TX status - version=2 type=3 length=95 - ack=1
IEEE 802.1X: 121 bytes from 40:a6:d9:a5:63:dd
   IEEE 802.1X: version=2 type=3 length=117
wlan2: STA 40:a6:d9:a5:63:dd WPA: received EAPOL-Key frame (2/4 Pairwise)
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKCALCNEGOTIATING
WPA: PTK derivation - A1=00:0e:8e:3f:f9:71 A2=40:a6:d9:a5:63:dd
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=48): [REMOVED]
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKCALCNEGOTIATING2
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKINITNEGOTIATING
wlan2: STA 40:a6:d9:a5:63:dd WPA: sending 3/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=1 mic=1 ack=1 install=1 pairwise=8 kde_len=46 keyidx=1 encr=1)
Plaintext EAPOL-Key Key Data - hexdump(len=56): [REMOVED]
IEEE 802.1X: 40:a6:d9:a5:63:dd TX status - version=2 type=3 length=151 - ack=1
IEEE 802.1X: 99 bytes from 40:a6:d9:a5:63:dd
   IEEE 802.1X: version=2 type=3 length=95
wlan2: STA 40:a6:d9:a5:63:dd WPA: received EAPOL-Key frame (4/4 Pairwise)
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKINITDONE
wpa_driver_nl80211_set_key: ifindex=6 alg=3 addr=0x216f2b0 key_idx=0 set_tx=1 seq_len=0 key_len=16
   addr=40:a6:d9:a5:63:dd
AP-STA-CONNECTED 40:a6:d9:a5:63:dd
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.1X: authorizing port
wlan2: STA 40:a6:d9:a5:63:dd RADIUS: starting accounting session 50E3DF21-00000000
wlan2: STA 40:a6:d9:a5:63:dd WPA: pairwise key handshake completed (RSN)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
Unknown Microsoft information element ignored (type=8 len=7)

STA 3c:d0:f8:10:0f:f0 sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
Unknown Microsoft information element ignored (type=8 len=7)

STA 5c:95:ae:d8:b7:ec sent probe request for broadcast SSID
mgmt::proberesp cb

hostapd가 더 이상 새로운 연결을 수락하지 않으면 출력은 다음과 같습니다.

mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for our SSID
mgmt::proberesp cb
mgmt::auth
authentication: STA=40:a6:d9:a5:63:dd auth_alg=0 auth_transaction=1 status_code=0 wep=0
  New STA
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: authentication OK (open system)
wlan2: STA 40:a6:d9:a5:63:dd MLME: MLME-AUTHENTICATE.indication(40:a6:d9:a5:63:dd, OPEN_SYSTEM)
wlan2: STA 40:a6:d9:a5:63:dd MLME: MLME-DELETEKEYS.request(40:a6:d9:a5:63:dd)
authentication reply: STA=40:a6:d9:a5:63:dd auth_alg=0 auth_transaction=2 resp=0 (IE len=0)
mgmt::auth cb
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: authenticated
mgmt::assoc_req
association request: STA=40:a6:d9:a5:63:dd capab_info=0x431 listen_interval=10
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
  new AID 1
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: association OK (aid 1)
mgmt::assoc_resp cb
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: associated (aid 1)
wlan2: STA 40:a6:d9:a5:63:dd MLME: MLME-ASSOCIATE.indication(40:a6:d9:a5:63:dd)
wlan2: STA 40:a6:d9:a5:63:dd MLME: MLME-DELETEKEYS.request(40:a6:d9:a5:63:dd)
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x263c270 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=40:a6:d9:a5:63:dd
wlan2: STA 40:a6:d9:a5:63:dd WPA: event 1 notification
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x263c270 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=40:a6:d9:a5:63:dd
wlan2: STA 40:a6:d9:a5:63:dd WPA: start authentication
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x263c270 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=40:a6:d9:a5:63:dd
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.1X: unauthorizing port
WPA: 40:a6:d9:a5:63:dd WPA_PTK_GROUP entering state IDLE
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state AUTHENTICATION
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state AUTHENTICATION2
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state INITPSK
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKSTART
wlan2: STA 40:a6:d9:a5:63:dd WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0)
nl80211: Event message available
nl80211: Ignored unknown event (cmd=19)
IEEE 802.1X: 40:a6:d9:a5:63:dd TX status - version=2 type=3 length=95 - ack=1
wlan2: STA 40:a6:d9:a5:63:dd WPA: EAPOL-Key timeout
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKSTART
wlan2: STA 40:a6:d9:a5:63:dd WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0)
IEEE 802.1X: 40:a6:d9:a5:63:dd TX status - version=2 type=3 length=95 - ack=1
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 00:15:6d:60:da:3b sent probe request for broadcast SSID
mgmt::proberesp cb
STA 00:15:6d:60:da:3b sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
wlan2: STA 40:a6:d9:a5:63:dd WPA: EAPOL-Key timeout
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKSTART
wlan2: STA 40:a6:d9:a5:63:dd WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0)
IEEE 802.1X: 40:a6:d9:a5:63:dd TX status - version=2 type=3 length=95 - ack=1
STA 00:15:6d:60:da:3b sent probe request for broadcast SSID
mgmt::proberesp cb
wlan2: STA 40:a6:d9:a5:63:dd WPA: EAPOL-Key timeout
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKSTART
wlan2: STA 40:a6:d9:a5:63:dd WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0)
IEEE 802.1X: 40:a6:d9:a5:63:dd TX status - version=2 type=3 length=95 - ack=1
STA 00:15:6d:60:da:3b sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
wlan2: STA 40:a6:d9:a5:63:dd WPA: EAPOL-Key timeout
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKSTART
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state DISCONNECT
hostapd_wpa_auth_disconnect: WPA authenticator requests disconnect: STA 40:a6:d9:a5:63:dd reason 2
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state DISCONNECTED
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x263c270 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=40:a6:d9:a5:63:dd
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.1X: unauthorizing port
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: deauthenticated due to local deauth request
nl80211: Event message available
nl80211: Ignored unknown event (cmd=20)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:b0:cd:fd sent probe request for broadcast SSID
mgmt::proberesp cb

다음을 실행하면 다른 두 시간 동안 문제가 해결됩니다.

sudo service hostapd restart

나는 가능한 한 많은 독서를했고 안정성 문제에 대해 제안 된대로 wlan2의 txpower를 16dbm에서 10dbm으로 줄이기 위해 노력했지만 문제는 남아 있습니다.

누구든지 도울 수 있다면 크게 감사하겠습니다.

12.04 hostapd

— 마크 프
소스

hostapd 서비스를 종료 한 다음 sudo hostapd -dd /etc/hostapd/hostapd.conf로 시작하십시오. 더 자세한 정보를 줄 수 있기를 바랍니다

— 문자열

외관상으로는 드라이버와 관련이있는 것 같습니다. 이것은 특정 칩셋에서만 발생했지만 다른 칩셋에서는 발생하지 않았기 때문입니다. 동일한 구성.

— Alba Mendez

@strings-위에서 언급 한대로 위의 출력을 복사 한 곳입니다.

— MarcF

@MarcF는 -dd로도 lspci를 사용하고 jmendeth가 언급 한대로 정확한 드라이버를 찾으십시오. 아마도 더 나은 드라이버가 있습니다.

— 문자열

@jmendeth-SparkLAN WPEA-111N 카드를 사용하고 있습니다. // lspci gives // 04 : 00.0 네트워크 컨트롤러 : Atheros Communications Inc. AR928X 무선 네트워크 어댑터 (PCI-Express) (rev 01)

— MarcF

sudo iwconfig카드의 '전원 관리'를 실행 하고 끕니다. 다시 부팅하여 문제가 없는지 확인하십시오. 다시 부팅 한 후 문제가 없는지 확인하십시오. 그렇지 않은 경우에 추가해야합니다 Startup Applications.
내 친구가 같은 문제에 직면했습니다. 기본 Atheros 드라이버는 비난을 받았습니다. TX 로그가 가득 차서 인증이 실패합니다.

'Software Sources'/ 'Software & Updates'의 'Updates'탭에서 'Backports'를 활성화하십시오.

그런 다음 시스템을 업데이트하십시오.

또한: sudo apt-get install linux-backports-modules-cw-3.6-precise-generic

재부팅 및 확인
여전히 실패하면 여기를 확인하십시오. 해결 : Ubuntu 12.04 Wifi Drivers

— 톰캣
소스

@MarcF 작동 여부에 관계없이 댓글로 알려주십시오. 답이 제대로 작동하면 다른 사람이 먼저 시도해야 할 사항을 알 수 있도록 답변하십시오. :-)

— TomKat

@TomKat은 TX- 로그가 255 개의 항목으로 채워져 있기 때문에 인증 핸드 셰이크를하지 못하는 이유입니다. 그 후 프로세스를 다시 시작하면 잠시 후에 다시 한 번 문제가 해결됩니다. Tx 전력을 낮추는 이유는 고장 사이의 시간을 느리게하는 이유는 본질적으로 연결이 가능한 범위를 제한했기 때문에 "시간당"기준으로 해당 범위에있는 사람이 적기 때문입니다. 따라서 연결 수가 적을수록 장애 발생 시간이 길어집니다. 또는 다시 WAY OFF가 될 수 있습니다.

— 벨리니
소스